Configure SNMP for CloudLink Center This chapter provides information about SNMP traps and configuring them in CloudLink Center. CloudLink Center can send Simple Network Management Protocol (SNMP) traps to a single target when CloudLink alarms are raised, updated, or lowered. Each server in a CloudLink cluster must be configured separately, because cluster members do not synchronize SNMP configuration. If a CloudLink alarm is set to Ignored, then SNMP traps are not sent for that alarm. Child TopicsAdd an SNMP configuration to the CloudLink CenterAdd an SNMP configuration to the CloudLink Center. Modify the SNMP configuration in the CloudLink CenterModify the SNMP configuration in the CloudLink Center. Send a test SNMP trap in the CloudLink CenterTest your SNMP configuration to ensure that the target receives SNMP traps from the CloudLink Center. Download MIB filesImport or upload the MIB file to the trap receiver or network management system application. CloudLink alarms use the Object Identifier (OID) 220.127.116.11.4.1.1139 for traps. Delete the SNMP configuration in the CloudLink CenterDelete the SNMP configuration in the CloudLink Center.